Skip to main content

E-Shape Microstrip Patch Antenna for Pervasive Wireless Communication at 14GHz (Ku Band)

E-Shape Microstrip Patch Antenna for Pervasive  Wireless Communication at 14GHz (Ku Band):




"Changing the shape of antenna will result in changed Radiation pattern so as to improve or locate required area changes in the conductive part of antenna should be done".


Labels:
Location: Pune, Maharashtra, India

Popular posts from this blog

Multiplexing and Multiple Access

Multiplexing And Multiple Access : Digital Communications Difference between Multiplexing and Multiple Access: Sr.No. Multiplexing Multiple Access 1 “In telecommunications and  computer networks, multiplexing is a process where multiple analog  message signals or digital data  streams are combined into one   signal over a shared medium.” “In telecommunications and computer networks, a channel access method or multiple access  method allows several terminals connected to the same multipoint physical medium to transmit over it and to share its capacity.” 2 The multiplexed signal is transmitted  over a communication channel,  which may be a physical transmission medium. A channel-access scheme is  based on a multiplex method  that allows several data streams  or signals to share the...
Read more

Difference in between Time division multiplexing (TDM) and Frequency division multiplexing (FDM)

Difference Between TDM and FDM: Complete Guide This comprehensive guide explains the difference between FDM and TDM multiplexing techniques. FDM stands for Frequency Division Multiplexing and TDM stands for Time Division Multiplexing . Both are fundamental techniques used in telecommunications to combine multiple signals for transmission over a single communication channel. Figure: Difference in between TDM and FDM
Read more

Call Setup GSM Flow

GSM Call Flow (GSM Originating Call) Call Setup GSM Flow Call Setup GSM Flow: •              The MSC sends an Initial Address Message (IAM) to the GMSC. The IAM contains the MSISDN of the called party as the MS dialed it. •              The MSC will also send a Call Proceeding (CALL_PROC) message down to the BSS and this is when the BSS would assign a TCH to the MS, as described earlier •              Based on the dialed number, the GMSC decides where to route the IAM within the PSTN. •              The PSTN will continue to route the IAM until it reaches the correct Switching Center and the call routing is complete. The PSTN will then establish the call circuit and send an Address Complete Message (ACM) back to the GMSC. •              The GMSC then forwards the ACM back to the r...
Read more